Hyundai brand mark

2016 Hyundai Tucson problems

A 2016 Hyundai Tucson is now 10 years old, so an average example has covered around 135,000 miles. This is the first model year of the generation · early-build cars carry the highest share of teething faults and the most recall activity, so check the service history for completed recall work. Check the state safety inspection and service history alongside the documented faults below, which are sorted by whether a 2016 car has usually reached the mileage where they appear.

Compiled & reviewed by the VehicleFaults Research Team

Quick answer

The 2016 Hyundai Tucson is 10 years old, so an average example has covered roughly 135,000 miles. At that mileage 5 of the documented faults are already due, so check those first.

Turn these known faults into a step-by-step viewing plan for this exact Hyundai Tucson · $9.

Build the inspection plan

Faults a 2016 example has usually reached

Documented onset mileage is at or below the ~135k miles an average 2016 car has covered.

EngineHigh

GDI engine (2.0/2.4) carbon build-up and, on some, bearing failure.

Typically appears
60,000+ miles
What to inspect
Check for knocking, oil consumption and confirm any engine recall/warranty work.
Exhaust/EmissionsHigh

DPF warning light illumination and vehicle entering limp-home mode due to soot accumulation, particularly on 1.7 and 2.0 CRDi models used for short journeys.

Typically appears
40,000-70,000 miles
What to inspect
Start the engine and check the instrument cluster for the DPF warning light. Rev the engine to 3,000 rpm to ensure it revs freely and has not defaulted to limp mode.
Body/InteriorMedium

Creaking, rattling, or sticking of the panoramic sunroof mechanism, caused by track debris or failing plastic guides.

Typically appears
30,000-60,000 miles
What to inspect
Operate the sunroof through a full open and close cycle. Listen for grinding noises and check that the glass seats flush with the roofline without manual assistance.
Climate ControlMedium

Air conditioning system blowing warm air due to a porous or stone-damaged condenser leaking refrigerant.

Typically appears
50,000-80,000 miles
What to inspect
Set the climate control to maximum cold with the engine running. Feel the vents for chilled air within 60 seconds and shine a torch through the lower front bumper grille to spot dark, oily patches on the condenser.
SteeringMedium

Noticeable clicking or clunking noise from the steering column when turning the wheel, caused by a degraded flexible rubber coupling within the EPS motor assembly.

Typically appears
60,000-90,000 miles
What to inspect
With the engine idling and wheels pointing straight, rapidly rock the steering wheel left and right by about 10 degrees. Listen for a distinct metallic clunk from behind the dashboard.

Faults that appear at any mileage

Age, electronics and build-related issues that are not mileage-driven.

TransmissionHigh

1.6T 7-speed dual-clutch hesitation, jerking and failure.

Typically appears
Any
What to inspect
Test-drive in traffic; feel for lurching and hesitation from a stop.
SafetyHigh

ABS module fire recall.

Typically appears
Any
What to inspect
Confirm the ABS/HECU recall was completed.
ElectricalLow

Infotainment and camera glitches.

Typically appears
Age-related
What to inspect
Test the screen and reversing camera.

Inspecting a 2016 Hyundai Tucson?

Turn this car's known weak points into a step-by-step viewing plan · what to inspect, what a bad result means and what to ask the seller.

Build my inspection plan

Hyundai Tucson · frequently asked questions

Is the Tucson reliable?

Value-packed but check the dual-clutch and engine history carefully.

Are there Tucson engine recalls?

Yes — GDI engine and ABS-fire campaigns exist; confirm completion.

Should I avoid the 1.6T DCT?

Test it thoroughly; the dual-clutch can be jerky and troublesome.

Do the 1.7 and 2.0 CRDi diesel engines use a timing belt or a timing chain?

Both the 1.7-litre and 2.0-litre CRDi diesel engines fitted to the Mk3 Tucson utilise a steel timing chain rather than a rubber cambelt. These chains are designed to last the lifetime of the vehicle, provided the car receives regular oil changes using the correct specification synthetic oil to prevent tensioner failure.

What should I check on the HTRAC all-wheel-drive system?

The HTRAC AWD system is generally robust, but the transfer case and rear differential require fluid changes every 40,000 miles to prevent premature wear. When inspecting, check the rear differential casing for oil leaks and ensure there is no binding or juddering from the drivetrain during tight, low-speed manoeuvres.

Are there any specific checks required for the 48V mild-hybrid models?

Introduced during the 2018 facelift, the 48V mild-hybrid system features a lithium-ion battery located under the boot floor. Dealers must ensure the boot area is completely dry, as water ingress from faulty tailgate seals can damage the battery and DC/DC converter. Replacement of these high-voltage components is highly expensive.

Other Tucson model years

Buying a Hyundai Tucson?

Build the plan