Timing chain

M270 / M274 1.6 / 2.0 turbo petrol timing chain guide

Mercedes-Benz · Infiniti · 2012-2019. Chain-driven. Camshaft adjuster rattle on cold start and oil leaks from the cam magnets are the documented wear points · a brief rattle when cold should be investigated, not ignored.

Drive type
Timing chain
Published interval
No scheduled change
Typical job cost
£1,200-£2,600
Buying risk
Low · no scheduled change, wear tracks oil quality

Fitted to

Commonly A-Class, B-Class, CLA, GLA, C-Class, E-Class (2012-2019). Engine codes changed through production, so confirm the code on the car in front of you before ordering parts or quoting the job.

Warning signs on the drive

  • Rattle for one to three seconds on cold start, then it quietens.
  • Chain or tensioner noise that rises with load rather than revs.
  • Timing-correlation fault codes (P0016, P0017) on a scan.
  • Long cranking before the engine catches.
  • Metal glitter in the oil or on the filter at service time.

What to check before you buy

  • Cold start it yourself and listen for a rattle before the oil pressure builds.
  • Scan for timing-correlation codes even if no light is on.
  • Check oil-service intervals · chain wear follows neglected oil more than mileage.
  • Look for a chain kit already fitted on high-mileage examples, which is a positive.
  • Spend the rest of the inspection budget on the faults this family is actually known for.

Questions dealers ask

Does the M270 / M274 1.6 / 2.0 turbo petrol have a timing belt or a chain?

The M270 / M274 1.6 / 2.0 turbo petrol used by Mercedes-Benz, Infiniti (2012-2019) runs a timing chain. Chain-driven. Camshaft adjuster rattle on cold start and oil leaks from the cam magnets are the documented wear points · a brief rattle when cold should be investigated, not ignored.

What is the M270 / M274 1.6 / 2.0 turbo petrol timing belt interval?

There is no scheduled replacement interval for a chain. Judge it on cold-start noise, fault codes and oil-service history instead.

How much does the job cost on a M270 / M274 1.6 / 2.0 turbo petrol?

Expect roughly £1,200-£2,600 at a UK independent garage, depending on whether the water pump and tensioner go in at the same time and how much has to come off to reach the belt. Main-dealer quotes usually sit above that range.

What happens if the timing drive fails?

On an interference engine the valves and pistons meet, which usually means a cylinder head at best and a replacement engine at worst. That is why an unproven timing history is a price conversation, not a detail.

Which models used the M270 / M274 1.6 / 2.0 turbo petrol?

Commonly A-Class, B-Class, CLA, GLA, C-Class, E-Class (2012-2019). The list is not exhaustive and engine codes changed through production, so confirm the exact code on the car in front of you before ordering parts or quoting work.

Related engines

Browse the whole fault library

Check the whole car, not just the belt

Fault Flag builds a model-specific inspection list from the make, model, year and mileage, so the belt sits alongside every other known weak point before you commit.